Initial Power Up

Take the AC power cord from Box C. Plug the rectangular end into the rear panel of the electrical enclosure and the other end into a matching L6-20R receptacle.

Power on the machine using the switch located at the back.

Power On
  • Is the machine powered on?
  • Do the radiator fans start running?
  • Is the chamber interior lighting on?
  • Is the touchscreen interface powered on and loading the AON3D logo?
  • Insert a piece of filament into each filament detector. Does the indicator LED light up when filament is inserted, and turn off when removed?

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.