Maintenance Cycles

Weekly/between material changes
  • Clean the build chamber
Monthly
  • Lubricate the axes
  • Change the wiper brush assembly
Every 6 months
  • Clean the electrical enclosure fan filter
  • Drain and refill the cooling circuit
As needed
  • Replace the heater block assembly
  • Kapton tape application
  • Swap materials in the heater block assembly
  • Firmware update
  • Hot end PID tuning
  • Endstop calibration

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.