1 Acrylonitrile Butadiene Styrene (ABS)
While you are free to use any brand and type of material you wish on your AON3D machine, we can only provide support for AON3D-validated materials that we have tested and developed processes for in-house, all of which can be purchased from AON3D directly by contacting email@example.com.
1.1 General Process Settings
1.2 Usage Notes
1.2.1 Build Surface Preparation
ABS prints best directly on Kapton tape. Wipe down the Kapton build surface with isopropanol before use. Larger prints and geometries especially prone to warping may require the use of Dimafix, an applied adhesion aid. A Dimafix Pen can be purchased from AON3D by contacting firstname.lastname@example.org.
1.2.2 Material Pre-treatment
ABS is mildly susceptible to hydration. When not in use, please store in a sealed package or container with dessicant. Support Material HIPS has excellent compatibility with ABS as a breakaway support material.
1.3 Sample Slicer Profiles
Single Extruder, 0.4mm nozzle: abs-sx-0.4mm
Dual Extruder with HIPS Support, 0.4mm nozzle: abs-dx-0.4mm
Single Extruder, 0.6mm nozzle: abs-sx-0.6mm
Dual Extruder with HIPS Support, 0.6mm nozzle: abs-dx-0.6mm