CF ULTEM™

1 Carbon Fiber Ultem™ 

Note

CF Ultem™ 9085 is classified as an experimental material for advanced users.

Info

While you are free to use any brand and type of material you wish on your AON3D machine, we can only provide support for AON3D-approved materials that we have tested and developed processes for in-house, all of which can be purchased from AON3D directly by contacting sales@aon3d.com.

1.1 General Process Settings

SettingValue
Extrusion Temperature370-400ºC
Bed Temperature175ºC
Chamber Temperature120ºC

1.2 Sample Slicer Profiles

Assumes 0.6mm nozzle installed.

Single Extruder

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.